Customer Support: 1.844.4HYTROL
Y Switch provides simple method of diverting or converging products from one line to another. Normal flow is to left curve looking from handle end. Transfer mechanism is raised to transfer products to other curve. Unit mounts on three stationary supports. Furnished with manual or pneumatic controls. Guard rails can be supplied-optional.
Hytrols LD Pusher is a light duty pusher designed to easily mount to the side on many conveyor models. The LD Pusher provides an economical solution for pushing lightweight products off at a right angle to product flow. Ideally used for reject or inspection stations. The LD Pusher is not designed for high cycle applications.
The Powered Pivot Diverter is designed for use with Models 138-ACC & 190-ACC Accumulating Conveyor. Products are automatically diverted onto adjacent 30 degree spur lines.
O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air bag actuator lifts the transfer mechanism while powered O-Rings transfer the product. Linear bearings are used to guide transfer as it is raised and lowered. Can be used with Models 138 and 190-NSP/NSPEZ line shaft conveyors.
Reversing O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air bag actuator lifts the transfer mechanism while powered O-Rings transfer the product. Linear bearings are useed to guide transfer as it is raised and lowered. Air cylinders operate reversing mechansism to reverse transfer flow. Can be used with Models 138 and 190 NSP/NSPEZ line shaft conveyors.
Chain Transfers are used to move products at right angles to adjacent or parallel conveyor lines. Air bags lift the transfer mechanism while powered chains transfer the product. Two or three strands of chain are available in either between rail (BR), conveyor to conveyor (CC), or Extended types. Chains run on UHMW polyethylene wearstrips to reduce friction. Can be used with Models 25-CRR, 26-CRR or 2511-CRA and 2511-CREZ chain driven roller conveyors.
35 Roller Transfer & 26-CRPT Power Rotated Turntable
The turntable is used to rotate products up to 180°. The turntable is powered by a chain drive that is located underneath the table top. It has proximity switches mounted on the base to sense position and control rotation of product. Turntable speed is approximately 3 revolutions per minute. A chain cable carrier keeps wires neat and out of the way. Any chain roller conveyor such as; 25-CRR, 26-CRR, 36-CRR, can sit on the table top. Due to sprocket sizes, only the 26-CRR or the 36-CRR is available with powered transition rollers; the others are only available with gravity transition rollers.
IMPORTANT: APPLICATION INFORMATION FOR ZERO-PRESSURE CONVEYORS!
Incline Lift Guide Powered Belt Conveyors