The Model PLEZD is a plastic belt conveyor designed to handle footed pallets, slip sheets, unitized loads, etc.-items normally non-conveyable on roller conveyor. The PLEZD provides Zero Back Pressure accumulation, reducing the possibility of product damage.

  • Bed 1/4" UHMW over steel bed channels mounted in 7-1/2" x 7 ga. powder painted formed steel channels
  • Belt 1" pitch polypropylene plastic belt
  • Overall Frame Widths 34", 38", 40", 44", 48", 50", 54", 64", 78"
  • Motor 1/2 HP Gearmotor at discharge of each zone
  • Supports Adjustable Floor Supports Available
  • Capacity Up to 2000 lbs.
  • Availability 1 Week (Contact for sizes available)
  • Downloads Downloads
  • Manual - Bulletin # 601
  • Manual - Effective Date April 2008

The Model R, besides being extremely convenient (it can be folded in half), is also extremely versatile. For example, its conveying uses include: truck, loft or freight car, floor-to-floor, stairway, as well as its use as a portable booster with a wheel or roller conveyor. It is also suitable for bag handling, bag and carton stacking, and moving cartons, cases, and boxes.

  • Reversible Yes
  • Features Switch - Reversing drum with power cord and plug
  • Downloads Downloads
  • Manual - Bulletin # 703
  • Manual - Effective Date April 2017

The Transnorm TS4200/150 is a belt conveyor with an angled terminal at one end allowing product to feed onto or discharge from a main line at 30° or 45°.

  • Belt Widths 3 Belt Widths
  • Supports Adjustable TS Inc Type Floor Supports Available
  • Other

    Endless Belting

    F.O.B. Arlington, Texas

  • Downloads Downloads

The Model BA is ideal for stacking, loading and unloading. One lever control adjusts angle without effort. Desired angle automatically locked by power screw.

  • Bed 4" deep x 20" wide x 12 ga. formed steel bed, hinged for storage purposes
  • Belt 14"
  • Belt Speed 65 FPM
  • Overall Conveyor Lengths 10', 12', 14', 16', 20', 22'
  • Motor 1 HP - 1-1/2 HP Available
  • Capacity 300 lbs. (total distributed load) - 150 lbs. (unit load)
  • Reversible Yes
  • Features Switch - Reversing drum with 20' power cord and plug, Self-powered Raising Device
  • Availability 4 Weeks (Contact for sizes available)
  • Downloads Downloads
  • Manual - Bulletin # 700
  • Manual - Effective Date April 2017

The Model TH is designed to handle empty cardboard boxes and paper trash.

  • Bed 14 ga. formed steel slider bed bolted between two 7-1/2" deep x 12 ga. formed steel side channels with 6" high guards.
  • Belt Widths 11-1/2", 17-1/2", 23-1/2", 29-1/2", 35-1/2", 41-1/2", 47-1/2", 53-1/2"
  • Drive Center Drive Standard
  • Motor 1 HP standard-2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear ft. of conveyor 10 lbs. not to exceed rated capacities
  • Downloads Downloads
  • Manual - Bulletin # 1027
  • Manual - Effective Date June 1997

The Model TS4100-150 uses a bilateral belt guide system to ensure constant and precise belt tracking that allows a minimal length and maximum width merge area. Other widths and lengths available, Contact Transnorm.

  • Belt Widths 4 Belt Widths
  • Belt Speed Speeds up to 600 FPM
  • Capacity 40 lb/ft Load Capacity
  • Other

    Clipper Lacing

    F.O.B. Arlington, Texas

  • Downloads Downloads

The Model TS1500-140 provides a positive flow of products by means of a belt, driven by tapered pulleys. Conveyor is versatile in that it can transport a wide variety of products. Available in 45°,60°, 90°, and 180° turns. Other degrees available. Contact Transnorm.

  • Belt Widths 20 Belt Widths
  • Supports Adjustable FSK-Type Floor Supports Available
  • Other

    Clipper Lacing

    F.O.B. Arlington, Texas

  • Downloads Downloads

The Model ABLR is a horizontal belt driven live roller conveyor, designed to transport medium to heavy cartons. Applications vary from manufacturing to distribution operations.

  • Bed Widths 11 Bed Widths
  • Drive Center Drive
  • Supports Adjustable MS-Type Floor Supports Available
  • Reversible Yes
  • Downloads Downloads
  • Manual - Bulletin # 706
  • Manual - Effective Date July 2017

The Model SBI is a floor-to-floor incline conveyor. It is equipped with an adjustable double nose-over at the discharge end to insure a smooth transfer from incline to horizontal plane. Inclines are easily adjusted up to 30°. This conveyor can also be used as a booster conveyor in gravity flow systems.

  • Bed 6-1/2" deep x 12 ga. formed steel frame powder painted. Standard sections come in lengths of 6', 8', & 10'
  • Belt Widths 10",12",14",16",18",20",22",24",28",30",34",36"
  • Drive Center Drive Standard
  • Motor 1 HP C-Face "SSB" Series Brake Motor - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity 100 lbs. (per linear foot)
  • Reversible Yes
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 635
  • Manual - Effective Date April 2011

The portable Model PCX parts conveyor can be easily positioned under punch presses and extruding machines to catch small steel, plastic, or aluminum stampings, etc. The PCX conveys them quickly up to a hopper or drum.

  • Bed 7-1/4" deep x 12 ga. formed steel side channel with bolt-in slider bed which provides 1" high sides above the belt
  • Belt Widths 12", 18", 24"
  • Belt Speed 25 FPM
  • Drive Underside Drive
  • Motor 1/2 HP standard - 2 HP max.
  • Capacity 100 lbs. (total distributed load)
  • Features Belt Scraper - mounted inside conveyor bed section to clean underside of return belt. Portable Base Support - adjustable from 4" to 30".
  • Downloads Downloads
  • Manual - Bulletin # 487
  • Manual - Effective Date February 2001

The Model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to Z type units.

  • Bed 8-5/8" deep x 10 ga. powder painted formed steel channel.
  • Motor 1 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Availability 1 Week (Contact for sizes available)
  • Downloads Downloads
  • Manual - Bulletin # 429
  • Manual - Effective Date March 1995

The Model PSB with modular plastic belting uses a positive drive system to eliminate belt slippage and mistracking.

  • Bed UHMW on aluminum slider bars mounted to frame spacers. Mounted in 7-1/2 in. x 12 ga. powder painted. Formed steel channel frame bolted together with butt couplings.
  • Belt Plastic modular belt
  • Belt Widths 12",18",24"
  • Motor 1/2 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity 300 lbs. (distributed live load)
  • Features Belt Scraper - mounted inside conveyor bed section to clean underside of return belt. Portable Base Support - adjustable from 4" to 30".
  • Downloads Downloads

A very versatile conveyor, the Model TA can be used in many types of material handling situations such as assembly line operations, sorting, packing, and inspection. Conveyor sets up quickly and easily to save on installation time.

  • Bed 4 in. deep x 12 ga. formed steel slider bed - powder painted
  • Belt Widths 6", 8", 10", 12", 14", 16", 18", 20", 24", 30"
  • Drive End Drive Standard
  • Motor 1/2 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear ft. of conveyor 75 lbs. not to exceed rated capacities
  • Reversible Yes (With Center Drive)
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 642
  • Manual - Effective Date May 2012

The Model TL with its rugged, heavy-duty construction, is ideally used for long assembly line operations, inspections, testing, sorting, and packing. Conveyor can be floor supported or ceiling hung.

  • Bed 6-5/8" deep x 12 ga. formed powder painted
  • Belt Widths 24",30",36",42",48"
  • Drive End Drive Standard
  • Supports Adjustable Floor Supports Available
  • Reversible Yes (With Center Drive)
  • Downloads Downloads
  • Manual - Bulletin # 578
  • Manual - Effective Date October 2006

Ideal for stacking, loading, and unloading. Cleats permit use at steeper inclines up to 45°. Complete with portable base.

  • Bed 4 in. deep x 20 in. wide x 12 ga. powder painted formed steel slider bed. Bed is hinged for storage purposes.
  • Belt 14 in. wide Black Trackmate 120 Roughtop with PVC cover. Clipper lacing.
  • Belt Speed Constant 65 FPM.
  • Overall Conveyor Lengths 10', 12', 14', & 16'
  • Motor 1 HP standard
  • Capacity 300 lbs. total distributed load, 150 lbs. unit load at 65FPM
  • Reversible Yes
  • Features Switch - Reversing drum with 20' power cord and plug
  • Downloads Downloads
  • Manual - Bulletin # 701
  • Manual - Effective Date April 2017

The Model SB is a slider bed conveyor designed with channel frames and bolt in pans. Frame design makes it ideal for matching up with roller bed conveyors.

  • Bed 6-1/2" deep x 12 ga. formed steel channel powder painted with galvanized bed pans
  • Overall Frame Widths 16", 18", 20", 22", 24", 26", 28", 30", 34", 36", 40", 42", 48", 54", 60"
  • Drive Center Drive Standard
  • Motor 1 HP standard-2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear ft. of conveyor; 100 lbs. not to exceed rated capacities
  • Reversible Yes
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 635
  • Manual - Effective Date April 2011

The portable Model PCA conveyor is easily positioned in or under punch presses, injection molding machines, extruding equipment, and other machinery where small steel or aluminum stampings, plastic parts, etc. must be quickly conveyed to hoppers or drums to keep production on the move.

  • Bed 12 ga. formed steel troughed bed with 1" high vertical sides
  • Belt Widths 4", 6", 8", 10", 12", & 18"
  • Belt Speed 65 FPM
  • Drive Overhead Drive
  • Motor 1/2 HP
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor is 10 lbs.
  • Downloads Downloads
  • Manual - Bulletin # 430
  • Manual - Effective Date July 1998

The Model A, with its Roughtop belt, easily moves boxes, cases, and cartons up inclines. Its narrow width allows it to be used in a stairway for floor-to-floor conveying. It can be propped on a shelf for stacking or order picking. The Model A can be stored on its end in a minimum amount of space.

  • Bed 12 in. wide x .080 aluminum, 6061-T6 heat treated, reinforced.
  • Belt 10 in. wide Black Trackmate 120 Roughtop with PVC cover. Clipper lacing.
  • Belt Speed Constant 83 FPM.
  • Overall Conveyor Lengths 8', 10', 12', 14', & 16'
  • Motor 1/2 HP maximum
  • Capacity 200 lbs. total distributed load, 120 lbs. unit load at 65FPM
  • Reversible Yes
  • Features Switch - Reversing drum with power cord and plug
  • Downloads Downloads
  • Manual - Bulletin # 704
  • Manual - Effective Date April 2017

The Model C handles bags, boxes, cartons, and parts. It may be set at any angle from horizontal to 45° for various uses, including floor-to-floor conveying and the transportation of materials from building to truck or box car.

  • Bed 6-5/8" deep x 12 ga. formed bed powder painted. Standard sections come in lengths of 6', 8', & 10'
  • Belt Hardwood cleats spaced every 60". Conveyor can be supplied less cleats.
  • Belt Widths 14", 18", 24", 30"
  • Motor Energy efficient motor with brake
  • Supports Adjustable Floor Supports Available
  • Capacity Up to 520 lbs.
  • Reversible Yes
  • Downloads Downloads
  • Manual - Bulletin # 434
  • Manual - Effective Date November 1998

The longer Model BL can be used to convey material from one floor to another... or to a balcony area. Its long bed can also extend far into a truck, thereby minimizing the distance for loading or unloading the conveyor.

  • Bed 4 in. deep x 20 in. wide x 12 ga. powder painted formed steel slider bed. Bed is hinged for storage purposes.
  • Belt 14 in. wide Black Trackmate 120 Roughtop with PVC cover. Clipper lacing.
  • Belt Speed Constant 65 FPM.
  • Overall Conveyor Lengths 20', & 22'
  • Motor 1 HP standard
  • Capacity 300 lbs. total distributed load, 150 lbs. unit load at 65FPM
  • Reversible Yes
  • Features Switch - Reversing drum with 20' power cord and plug. Self-powered Raising Device.
  • Downloads Downloads
  • Manual - Bulletin # 702
  • Manual - Effective Date April 2017

The Model PC can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

  • Bed 6-5/8" deep x 12 ga. formed steel bed with 3-1/2" high vertical guards
  • Belt 1-1/2" high molded cleats on 12" centers
  • Belt Widths 4",6",8",10",12",16",18",24"
  • Belt Speed 65 FPM
  • Drive End Drive (Overhead)
  • Motor 1/2 HP standard - 2 HP max.
  • Capacity 300 lbs. (total distributed load)
  • Features Portable base support is tubular steel mounted on 4" dia. steel wheels. Adjustable to control conveyor height at top and bottom. Adjustable floor supports available on longer units
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 594
  • Manual - Effective Date July 2007

The Model PSBC with modular plastic belting uses a positive drive system to eliminate belt slippage and mistracking.

  • Bed UHMW on aluminum slider bars, mounted to frame spacers. Mounted in 7-1/2 in. x 12 ga. powder painted, formed steel channel frame bolted together with butt couplings.
  • Belt Plastic Modular Belt
  • Belt Widths 12", 18" & 24"
  • Motor 1/2 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity 300 lbs. distributed live load
  • Downloads Downloads

The model Gapper is designed for feeding saw tooth merges, combiners, sorters, or other equipment where gaps must be pulled between cartons.

  • Bed 12 ga. galvanized slider pan mounted in 6-1/2 in. x 12 ga. powder painted formed steel channel frame.
  • Belt Widths 12", 18", 24", 30", & 36"
  • Belt Speed 6 Speed Gap Ratios
  • Drive Center Drive (standard)
  • Motor 1 HP standard. 3 HP max.
  • Supports Adjustable Floor Supports Available
  • Downloads Downloads
  • Manual - Bulletin # 519
  • Manual - Effective Date June 2003

The Model TR with built-in guard rails is ideal for overhead conveying applications. It easily conveys boxes, cartons, cases, bags, etc. as well as loose parts.

  • Bed 4" deep x 12 ga. formed with 2-1/2" high guards powder painted
  • Belt Widths 6", 8", 10", 12", 14", 16", 18", 20", 24", 30"
  • Drive End Drive Standard
  • Motor 1/2 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear ft. of conveyor 75 lbs. not to exceed rated capacities
  • Reversible Yes (With Center Drive)
  • Downloads Downloads
  • Manual - Bulletin # 557
  • Manual - Effective Date June 2005

Experience The Advantage. 870-935-3700 Email Us Chat With Us

Go to top