The Model 36-CRRH is a heavy-duty chain driven roller conveyor. Its tough, rugged design provides service under demanding manufacturing operations. The 36-CRRH is for conveying heavy pallets and drums.

  • Bed structural steel channel frame powder painted
  • Rollers Chain Driven - 3-1/2" dia. x .300 wall unplated tread rollers spaced every 6" or 12"
  • Overall Frame Widths 26-27/32", 28-27/32", 30-27/32", 34-27/32", 36-27/32", 40-27/32", 42-27/32", 48-27/32", 54-27/32", 60-27/32", 62-27/32", & 70-27/32"
  • Drive Side Mounted Drive
  • Motor 2 HP standard - 3 HP max.
  • Drive Chain #60 roller chain
  • Supports Non-Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor; 2000 lbs. with supports on 5 ft. centers
  • Reversible Yes
  • Applications pallet handling, drum handling
  • Downloads Downloads
  • Manual - Bulletin # 531
  • Manual - Effective Date November 2003

The Model TL with its rugged, heavy-duty construction, is ideally used for long assembly line operations, inspections, testing, sorting, and packing. Conveyor can be floor supported or ceiling hung.

  • Bed 6-5/8" deep x 12 ga. formed powder painted
  • Belt Widths 24",30",36",42",48"
  • Drive End Drive Standard
  • Supports Adjustable Floor Supports Available
  • Reversible Yes (With Center Drive)
  • Downloads Downloads
  • Manual - Bulletin # 578
  • Manual - Effective Date October 2006

The Model DCEZD-62 is a two strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure, reducing the possibility of collision that may result in product damage.

  • Drive EZDrive™ System (Individual zone drive)
  • Supports Adjustable DCS-Type Floor Supports Available
  • Features 2 Strand Design. EZLogic® Accumulation System. Modular Assembly.
  • Annotations New Product
  • Downloads Downloads

The Model 199-CRE24EZ Accumulating conveyor uses a 24VDC motor/reducer to drive chain driven tread rollers. This conveyor is designed to handle cartons or pallets in conditions that may not be suitable for belt driven rollers. Products may be accumulated in zones and released upon request.

  • Drive Shaft Mounted 24VDC Drive
  • Drive Chain Chain Driven Rollers
  • Supports Adjustable MSN-Type Floor Supports Available
  • Other

    EZLogic Accumulation System

  • Downloads Downloads

The Model 25-PVE24EZ Accumulating conveyor uses a 24 VDC motor/reducer to drive Poly-V Belt driven thread rollers. This conveyor is designed to handle loads such as pallets, drums, containers, etc. Products may be accumulated in zones and released upon request.

  • Rollers Poly-V Belt Driven Rollers
  • Drive Shaft Mounted 24VDC Drive
  • Supports Adjustable HSN-Type Floor Supports Available
  • Features EZLogic® Accumulation System
  • Annotations New Product
  • Downloads Downloads

The model DCEZ is a drag chain conveyor designed to handle pallets. With EZLogic® accumulation module, pallets are accumulated with zero-back pressure reducing the possibility of collision that may result in product damage.

  • Downloads Downloads
  • Manual - Bulletin # 580
  • Manual - Effective Date November 2006

The Model DCEZD-83 is a three strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure, reducing the possibility of collision that may result in product damage.

  • Drive EZDrive™ System (Individual zone drive). Shaft Mounted Drives.
  • Supports Adjustable DCS-Type Floor Supports Available
  • Features 3 Strand Design. EZLogic® Accumulation System.
  • Annotations New Product
  • Downloads Downloads

The model DCEZ-63 is a three strand drag chain conveyor designed to handle pallets. With EZLogic® accumulation module, pallets are accumulated with zero-back pressure reducing the possibility of collision that may result in product damage.

  • Bed 6" x 7 ga. powder painted formed steel angle with 1-1/2" x 3/16" wall steel chain support tube
  • Overall Frame Widths 37-7/8", 43-7/8", 49-7/8", 55-7/8", 61-7/8", 67-7/8", 73-7/8", 79-7/8", 85-7/8", 91-7/8", & 99-7/8"
  • Motor 1-1/2 HP Gearmotor
  • Supports Floor Supports Available
  • Capacity 11,000 lbs. maximum load at 30 FPM
  • Features C-2060-H Double Pitch Conveyor Chain
  • Downloads Downloads

The Model DCEZ-83 is a three strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure reducing the possibility of collision that may result in product damage.

  • Downloads Downloads

The Model 36-CREZD is a chain driven live roller conveyor designed to handle loads such as pallets, drums, etc. Items are accumulated with zero back pressure, reducing the possibility of collisions that may result in product damage.

  • Bed 5-3/4" x 4 ga. formed channel on side opposite chain guard and 7-3/4" x 4 ga. formed channel on chain guard side
  • Rollers 3-1/2" dia. x .300 wall unplated rollers spaced every 6"
  • Overall Frame Widths 34-1/4", 38-1/4", 42-1/4", 46-1/4", 50-1/4", 54-1/4", 58-1/4", 62-1/4", 66-1/4", & 70-1/4"
  • Drive EZDRIVE
  • Motor 1/2 HP Shaft mounted gear motor located near center of each zone
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor; 2000 lbs. Maximum unit load; 5000 lbs. per zone
  • Downloads Downloads
  • Manual - Bulletin # 661
  • Manual - Effective Date February 2015

The Model 25-CRE24EZ Accumulating conveyor uses a 24VDC motor/reducer to drive chain driven thread rollers. This conveyor is designed to handle loads such as pallets, drums, containers, etc. Products may be accumulated in zones and released upon request.

  • Rollers Chain Driven Rollers
  • Drive Shaft Mounted 24VDC Drive
  • Supports Adjustable HSN-Type Floor Supports Available
  • Features EZLogic® Accumulation System
  • Annotations New Product
  • Downloads Downloads

The Model DC-62 is a two strand drag chain conveyor designed to handle pallets.

  • Other

    Modular Assembly

  • Downloads Downloads

Hytrol heavy-duty roller conveyor Model 36-SR is designed and constructed to convey heavy loads, such as pallets, castings, etc. in steel industries and other manufacturing operations which require heavy-duty conveying equipment. Roller may be set high or low in conveyor frame depending on applications.

  • Downloads Downloads

The Model 25-CREZD is a chain driven live roller conveyor designed to handle loads such as pallets, drums, etc. Items are accumulated with zero back pressure, reducing the possibility of collisions that may result in product damage.

  • Bed 4" x 4 ga. formed steel channel frame powder painted
  • Rollers 2-1/2" dia. x 11 ga. unplated tread rollers spaced every 4" or 6"
  • Overall Frame Widths 34-1/4", 38-1/4", 42-1/4", 46-1/4", 50-1/4", 54-1/4", 58-1/4", 62-1/4", 66-1/4", & 70-1/4"
  • Drive 1/2 HP Shaft mounted gearmotor located near center of each zone
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor; 1000 lbs. Maximum unit load; 3000 lbs. Total load not to exceed rated capacities
  • Other

    Accumulation Zones - 60" Long standard. Other lengths available

  • Downloads Downloads
  • Manual - Bulletin # 661
  • Manual - Effective Date February 2015

The Model 25-CRRCT is a heavy duty, chain driven roller curve conveyor commonly used in conjunction with the 25-CRR conveyor to carry heavy unit loads such as pallets and drums.

  • Bed 4 ga. formed steel channel frame powder painted
  • Rollers Chain Driven Tapered Tread Rollers
  • Overall Frame Widths 22-1/4", 24-1/4", 26-1/4", 28-1/4", 30-1/4", 34-1/4", 36-1/4", 40-1/4", 42-1/4", 46-1/4", 50-1/4", 58-1/4", 64-1/4" & 70-1/4"
  • Drive Center Drive
  • Motor 1 HP standard - 1 HP max.
  • Drive Chain #50 roller chain
  • Supports Adjustable Floor Supports Available
  • Capacity 4000 lbs.
  • Reversible Yes
  • Downloads Downloads

The Model DCEZD-63 is a three strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure, reducing the possibility of collision that may result in product damage.

  • Drive EZDrive™ System (Individual zone drive)
  • Supports Adjustable DCS-Type Floor Supports Available
  • Features 3 Strand Design. EZLogic® Accumulation System. Modular Assembly.
  • Annotations New Product
  • Downloads Downloads

The Model 25-LREZ is a belt driven live roller conveyor designed for use where zero-pressure accumulation, low elevation (12"), and close roller centers are required.

  • Bed 7-1/2" deep x 10 ga. formed steel channel frame powder painted
  • Rollers 2-1/2" dia. x 11 ga. unplated tread rollers spaced every 3" and 1.9" dia. x 16 ga. unplated pressure rollers spaced every 6"
  • Overall Frame Widths 42", 44", 46", 48", 50", 52", 54", 64", 76", & 88"
  • Motor 1 HP standard - 2 HP max.
  • Supports Fixed Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor; 1000 lbs. Maximum unit load; 4000 lbs. Total load not to exceed rated capacities
  • Other

    Accumulation Zones - 60" Long Standard Air Controlled. Other lengths available

    Low Elevation

  • Downloads Downloads
  • Manual - Bulletin # 603
  • Manual - Effective Date April 2008

The Model DCEZD-82 is a two strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure, reducing the possibility of collision that may result in product damage.

  • Drive EZDrive™ System (Individual zone drive). Shaft mounted drives.
  • Supports Adjustable DCS-Type Floor Supports Available
  • Features 2 Strand Design. EZLogic® Accumulation System.
  • Annotations New Product
  • Downloads Downloads

The heavy design of the 25-CRR allows it to be used for conveying higher load capabilities such as loaded pallets and drums. Chain driven rollers make it ideal for conveying oily parts in bottling and steel industries.

  • Bed 4 ga. formed steel channel frame powder painted
  • Rollers Chain driven - 2-1/2" dia. x 11 ga. unplated tread rollers spaced every 4" with #40 chain; 3", 3-3/4", 5", 7-1/2", or 10" with #50 roller chain. #60 Roller Chain used on 3", 3-3/4", 6", 7-1/2", and 12" roller centers only
  • Overall Frame Widths 22-1/4", 24-1/4", 26-1/4", 28-1/4", 30-1/4", 34-1/4", 36-1/4", 40-1/4", 42-1/4", 46-1/4", 50-1/4", 54-1/4", 58-1/4", 64-1/4" & 70-1/4"
  • Drive Center Drive
  • Motor 1 HP standard - 2 HP max.
  • Drive Chain #40, 50, or 60 roller chain
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per liner foot of conveyor; 300 lbs. with supports on 10' centers; 1000 lbs. with supports on 5' centers
  • Applications pallet handling, drum handling
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 639
  • Manual - Effective Date February 2012

The model 199-CREZD is a chain driven live roller conveyor designed to handle cartons or pallets in conditions not suitable for belt driven rollers. Items are accumulated with Zero Back Pressure reducing the possibility of collisions that may result in product damage.

  • Bed 3-1/2" x 7 ga. formed channel on side opposite chain guard and 4-3/4" x 7 ga. formed channel on chain guard side
  • Rollers 1.9" dia. x 9 ga. unplated rollers spaced every 4" or 6"
  • Overall Frame Widths 18", 20", 22", 24", 26", 28", 30", 34", 36", 40" & 42"
  • Drive EZDRIVE
  • Motor 1/3 HP Shaft mounted gearmotor located near center of each zone
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor - 150 lbs with supports on 10 ft. centers, 250 lbs. with supports on 5 ft. centers. Not to exceed 1000 lbs. per zone.
  • Downloads Downloads
  • Manual - Bulletin # 661
  • Manual - Effective Date February 2015

The Models 25/26-CRRC is a heavy duty, chain driven roller curve conveyor commonly used in conjunction with the 25/26-CRR conveyor to carry heavy unit loads such as pallets and drums.

  • Bed 4 ga. formed steel channel frame powder painted
  • Rollers Chain Driven Tread Rollers
  • Overall Frame Widths 22-1/4", 24-1/4", 26-1/4", 28-1/4", 30-1/4", 34-1/4", 36-1/4", 40-1/4", 42-1/4", 46-1/4", 50-1/4", 54-1/4", 56-1/4", 58-1/4", 60-1/4" & 62-1/4
  • Drive Center Drive
  • Motor 1 HP standard - 2 HP max.
  • Drive Chain #50 circular roller chain
  • Supports Adjustable Floor Supports Available
  • Capacity 4000 lbs.
  • Reversible Yes
  • Downloads Downloads

The Model DC-83 is a three strand drag chain conveyor designed to handle pallets.

  • Downloads Downloads

The Model DCEZ-82 is a two strand drag chain conveyor designed to handle pallets. With EZLogic® Zone Controller, pallets are accumulated with zero pressure, reducing the possibility of collision that may result in product damage.

  • Downloads Downloads

The Model 25-PVEZD is a Poly-V Belt driven live roller conveyor designed for zero pressure accumulation of products. This conveyor is designed to handle loads such as pallets, drums, containers, etc. Products may be accumulated in zones and released upon request.

  • Rollers Poly-V Belt Driven Rollers
  • Drive Shaft Mounted Drive
  • Supports Adjustable HSN-Type Floor Supports Available
  • Features EZDrive System (Individual zone drive). EZLogic® Accumulation System.
  • Annotations New Product
  • Downloads Downloads
  • Manual - Bulletin # 662
  • Manual - Effective Date August 2015

The heavy design of the 25-PVR allows it to be used for conveying higher load capacities such as loaded pallets and drums. Poly-V belt driven rollers make it ideal for conveying heavier parts where no maintenance or a more quiet conveyor is required.

  • Bed Widths 15 Bed Widths
  • Rollers Poly-V Belt Driven Rollers
  • Drive Shaft Mounted Drive
  • Supports Adjustable HSN-Type Floor Supports Available
  • Reversible Yes
  • Annotations New Product
  • Downloads Downloads

The Model DC-82 is a two strand drag chain conveyor designed to handle pallets.

  • Downloads Downloads

The Model DC-63 is a three strand drag chain conveyor designed to handle pallets.

  • Bed 6" x 7 ga. powder painted formed steel angle with 1-1/2" x 3/16" wall steel chain support tube
  • Overall Frame Widths 37-7/8", 43-7/8", 49-7/8", 55-7/8", 61-7/8", 67-7/8", 73-7/8", 79-7/8", 85-7/8", 91-7/8", & 99-7/8"
  • Motor 1-1/2 HP Gearmotor
  • Supports Floor Supports Available
  • Capacity 6000 lbs. maximum load at 30 FPM
  • Features Modular Assembly
  • Other

    C-2060-H Double Pitch Conveyor Chain

  • Downloads Downloads

The heavy design of the 26-CRR allows it to be used for conveying higher load capabilities such as loaded pallets and drums. Chain driven rollers make it ideal for conveying oily parts in bottling and steel industries.

  • Bed 4 ga. formed steel channel frame powder painted
  • Rollers 2-5/8" dia. x 7 ga. unplated tread rollers spaced every 4" with #40 chain; 3", 3-3/4", 5", 7-1/2", or 10" with #50 roller chain. #60 Roller Chain used on 3", 3-3/4", 6", 7-1/2", and 12" roller centers only
  • Overall Frame Widths 22-1/4", 24-1/4", 26-1/4", 28-1/4", 30-1/4", 34-1/4", 36-1/4", 40-1/4", 42-1/4", 46-1/4", 50-1/4", 54-1/4", 58-1/4", 64-1/4" & 70-1/4"
  • Drive Center Drive
  • Motor 1 HP standard - 2 HP max.
  • Drive Chain #40, 50, or 60 roller chain
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per liner foot of conveyor; 300 lbs. with supports on 10' centers; 1000lbs. with supports on 5' centers
  • Reversible Yes
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 639
  • Manual - Effective Date February 2012

Experience The Advantage. 870-935-3700 Email Us Chat With Us

Go to top