The portable Model PCA conveyor is easily positioned in or under punch presses, injection molding machines, extruding equipment, and other machinery where small steel or aluminum stampings, plastic parts, etc. must be quickly conveyed to hoppers or drums to keep production on the move.

  • Bed 12 ga. formed steel troughed bed with 1" high vertical sides
  • Belt Widths 4", 6", 8", 10", 12", & 18"
  • Belt Speed 65 FPM
  • Drive Overhead Drive
  • Motor 1/2 HP
  • Supports Adjustable Floor Supports Available
  • Capacity Maximum load per linear foot of conveyor is 10 lbs.
  • Downloads Downloads
  • Manual - Bulletin # 430
  • Manual - Effective Date July 1998

The Model PC can be used as a portable or permanent parts conveyor. Side guards and cleated belt easily catch small stampings, plastic parts, etc., and carry them to hoppers or drums. Flapper guard prevents parts from falling through conveyor.

  • Bed 6-5/8" deep x 12 ga. formed steel bed with 3-1/2" high vertical guards
  • Belt 1-1/2" high molded cleats on 12" centers
  • Belt Widths 4",6",8",10",12",16",18",24"
  • Belt Speed 65 FPM
  • Drive End Drive (Overhead)
  • Motor 1/2 HP standard - 2 HP max.
  • Capacity 300 lbs. (total distributed load)
  • Features Portable base support is tubular steel mounted on 4" dia. steel wheels. Adjustable to control conveyor height at top and bottom. Adjustable floor supports available on longer units
  • Availability Online
  • Downloads Downloads
  • Manual - Bulletin # 594
  • Manual - Effective Date July 2007

The portable Model PCX parts conveyor can be easily positioned under punch presses and extruding machines to catch small steel, plastic, or aluminum stampings, etc. The PCX conveys them quickly up to a hopper or drum.

  • Bed 7-1/4" deep x 12 ga. formed steel side channel with bolt-in slider bed which provides 1" high sides above the belt
  • Belt Widths 12", 18", 24"
  • Belt Speed 25 FPM
  • Drive Underside Drive
  • Motor 1/2 HP standard - 2 HP max.
  • Capacity 100 lbs. (total distributed load)
  • Features Belt Scraper - mounted inside conveyor bed section to clean underside of return belt. Portable Base Support - adjustable from 4" to 30".
  • Downloads Downloads
  • Manual - Bulletin # 487
  • Manual - Effective Date February 2001

The Model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to Z type units.

  • Bed 8-5/8" deep x 10 ga. powder painted formed steel channel.
  • Motor 1 HP standard - 2 HP max.
  • Supports Adjustable Floor Supports Available
  • Availability 1 Week (Contact for sizes available)
  • Downloads Downloads
  • Manual - Bulletin # 429
  • Manual - Effective Date March 1995

Experience The Advantage. 870-935-3700 Email Us Chat With Us

Go to top